Kernel Data InPage Error

Kernel Data InPage Error is common error in the Windows 10 Platform. Users will see a Blue Screen of Death(BSOD) Error code also called as a STOP Code. 

This Kernel Data InPage Error appears when a system does not boot from a major hardware or software issue. In turn, all functionality in the system stops and then the users sees a BSOD  with the error code: KERNEL Data Inpage Error(MsFs.SYS).

The common BSOD errors codes appear along with BSOD are:

• 0x0000007A
• 0xC000009A
• 0xC000009C
• 0xC000009D
• 0xC000016A
• 0xC0000185

What causes Kernel Data InPage Error?

Issue is related to Memory, Hard Disk corruption, RAM issues, other issues could be:

• Hard Drive Errors
• Faulty Wires and Connections
• Invalid BIOS Settings
• Issue due to Chipset drivers
• Virus infection
• Malware infection
• System File Corruption
• Paging File Corruption
• Corrupt Device Drivers
• Data Loss
• Failing to read Critical Data

How to fix the Kernel Data InPage Error?

Step 1: If you are using a Desktop, check the hard drive, RAM connections and system internal for loose connections.

Step 2: Run CHKDSK Repair, where this will help to check a disk like minor file system errors, corruption, and reallocate bad sectors

Use the following command in the command prompt to check the disk and to display the status report:

chkdsk /r /f C: and press 'Enter'

/r - Locates the bad sectors and recovers readable information

/f - Fixes errors on the disk

C: - specify the volume of drive letter:

Incase of partition is not visible, open the Disk Management tool and run the chkdsk scan.

Incase nothing works, try using a Data Recovery Software which can help recover data from severely corrupt and damaged partition.

Note: If using a laptop, try removing the battery... (it never worked for me by removing the battery, but most of the forums advice to remove the battery and see...).

Microsoft Edge Error : Error code 7:0x800421F7 after update

 When you update the Microsoft Edge, some user might be facing an error like this

When this error message is displayed, the general fix is to check the Internet connection and proxy settings. This error occurs due to an incorrect update or the update is not properly installed in the system. You may try to fix this issue by checking your network configuration and proxy settings.

How to fix this issue?

Step 1: In the search bar, type troubleshoot and open the Network Adapter

Note:  Run the inbuilt troubleshooter, at the end the troubleshooter might say if there is an issue with the wireless adapter or access point.

Step 2: Check the Proxy configuration, if your windows are running any proxy software, close and check whether you can update the Microsoft Edge.

Step 3: Reset the WinHTTP Proxy setting by executing the following command netsh winhttp reset proxy in the command prompt (As the error is related to HTTP error, it is good enough to reset the WinHTTP proxy settings)

Wait for some time and then restart your computer. The issue might self-clear once the Microsoft Edge updates correctly and the error will not be displayed.

Opening and Configuring *.EML files

I was trying to help one of my users to open the *.eml files in Outlook. Even though the default extensions were configured correctly, the system was unable to recognize the *.eml file format.

Records i/e., files with the file extensions .eml must be dispatched by specific applications. It's conceivable that .eml records are plain text records instead of archives or media, which means they're not intended to be seen by any stretch of the imagination. 

EML documents are used in email messages in plain content formats. It is utilized in Microsoft's Outlook Express saved Mail Messages and some portion of Microsoft's email programs. The design of the EML document is standard and ordinarily contains the header and the message or the principle body. The email address of the sender and the recipient including the subject, time, and date contains the header of the document, and the body subtleties the actual message. Email messages may likewise demonstrate connections and different hyperlinks that the sender has glued to the EML record.

How to change the default apps in Windows 10?

Step 1: Press the Windows key + I to open the setting and search for Default apps 

Step 2: Under Default apps-> look for "Choose default apps by file type"

Step 3: Scroll down to find the email extension and change/update the application to outlook(since am using outlook, I had changed my default application as Outlook.

Step 5: Finally, I was able to open the user's mail. Just in case, if the application/email is not opening. Trying recreating the profile in Outlook.

Windows 10: April 2021 - Updates

Windows 10 April 2021 update is currently carrying out and another fix is accessible for 20H2, v2004, and v1909 versions. April Patch update accompanies fixes for Blue Screen of Death blunders brought about by printers, execution issues, and File Explorer's messed up search bar.

Windows 10 April 2021 update likewise accompanies security fixes for security bugs and more than 102 weaknesses. As indicated by the delivery notes, Microsoft has checked 19 security issues as "basic", while 89 weaknesses are stamped "significant". This update additionally fixes Microsoft Exchange issues.

Notwithstanding these security fixes, Windows 10's April 2021 update is likewise the principal Patch Tuesday delivery to transport without Microsoft Edge Legacy. The Legacy or UWP adaptation of Edge has been suspended.

How to install these updates?

Step 1: Select the Windows Key + I to open the settings windows

Step 2: Select the Update and Security

Step 3: Select the Windows Update and Install.

Step 4: Reboot the System.

Adding Microsoft Teams Add-in to Outlook Calendar

If the Microsoft Teams meeting add-in is not loading, then Microsoft Teams likely need to be re-installed. Please use the following instructions to re-install the Microsoft Team applications:

Step 1: Press the Windows Key + R on the keyboard to open the RUN Tool.

Step 2: Enter appwiz.cpl and select OK.

Step 3: Search for Microsoft Teams and uninstall the application.

Step 4: Wait for the application to uninstall. If there is no prompt/dialog windows do not open, the application is uninstalling and will be removed from the list.

Step 5: Before installing the Teams application, completely close the outlook.

Step 6: Download and re-install the Teams Application from the Microsoft Website.

Step 7: Team will begin installing, Enter your organization email address or the associated email.

Step 8: Enter your email password to configure the Microsoft Teams.

Step 9: Open your Outlook and check if the Teams add-in is present. If it not, wait for some time, close, and re-open / reboot your machine for the changes to take effect. 

Know your Windows 10 Editions

 

Windows 10 Editions
Windows Edition	Who can use	Availability
Windows 10 Home	Individual/Home use	Everyone can use
Windows 10 Pro	Advanced Users, Small and medium-sized business users	Everyone can use
Windows 10 Enterprise	Large Enterprises	Available only for Volume Licensing users
Windows 10 Enterprise LTSB	Large Enterprises	Available only for Volume Licensing Users
Windows 10 Education	Available for school staff, administrators, teachers and students	Through Academic volume Licensing

Windows Event Viewer

I was asked a question about Windows Event Viewer in an Interview. I was able to explain a few features of the Event Log. Stumbled upon the questions asked about Windows Event Viewer (Event Log).

What is an Event Viewer or Event Log?

The Windows Event Viewer (sometimes called the Event Log) stores details of everything that happens in the OS, from routine operations to crashes and even Blue Screens of Death(BSOD).

Custom View: Used to monitor the specific events on a System.

Windows Logs: Contains the event log information for windows events only.

Application and Service Logs: contains the logs for installed applications, both windows and third party services.

Subscriptions: contains or collect logs from mutliple remote computers and store them to view locally.

Event Viewer(Local) is where the event logs are displayed. 

When you select the Event Viewer(Local), the central column separate into four collasible panels like Overview, Summary of Adminstrative Events, Recently viewed nodes and log summary.

Overview: Summary of the view opened.

Summary of Administrative Events: Enumerates all the event logs stored in the system into six different categories.

Critical - Errors that result in a sudden System Failure, like Blue Screen of Death(BSOD), a windows core (kernel) component failure, critical driver stop or power issues.

Error - This is generated when a Windows Component, application or Service Fails.

Warnings - When a Windows component, application or the service triggers a message or error that does not cause the event to stop.

Information - Whenever a Service or component starts / there is an event such as an update, installation or event in an application is recorded.

Audit Success - This is generated when the system is starting and booting to the windows desktop is completed.

Audit Failure - When a routine operation does not complete or reports an error.

Recently Viewer Nodes - Most recents events can be viewed here.

Log Summary - Displays the technical information about the current displayed events.

In the next post, we will see about the Various logs and how to decipher the details of an event in Windows 10.

Windows 10 Tips - Windows + X feature

Windows 10 Tips will a part of a new series to explore the features. In today's series, Let discuss the Windows + X feature.

Microsoft has been focusing on how individuals use Windows. One reason the Start Menu (as known in the times of XP) is gone is on the grounds that individuals were investing a great deal of energy doing mouse developments and snaps just to dispatch a program. 

Windows+ X is perhaps the best illustration of the work Microsoft has done to improve the client experience and make it more proficient: Most administrative tools can be opened with a simple key combination

Windows 10 Tips - Local Security Policy

 Do you know how to set up and remind you to change your windows password? Let see how to do this.

Step 1: Search for Local Security Policy 

The Password Policy strategy implements explicit qualities that control how frequently the password is changed, how complex it is, and whether clients can reuse old passwords.

Feeling bored... Try playing with your fingers. i.e., configure the properties of each field and enjoy!!!

Step 2: Rest your fingers... lol

Maximize Windows 10 Productivity

When you get another Windows PC of any make, the default setup is advanced for the necessities of the maker—not for you. You need to take control, yet it can require long stretches of effort, time, and adjust in the event that you don't have a clue where to begin.

Do you know how to optimize your Windows 10 and increase productivity? 

Windows Taskbar 

Step 1: Lock the Taskbar

Step 2: Use Smaller Taskbar buttons

Step 3: Choose the applications that have to be displayed in the system tray

Step 4: Hide all useless icons in the taskbar

Step 5: Remove all desktop icons except Recycle Bin(it's hard to have a cleaner desktop)

Step 6: If you know other methods, swear your comments.........

KB5000842 - Update

Microsoft has delivered a Cumulative Preview Update KB5000842 for Windows 10 variant 2004 just as from 20H2 on March 29th, 2021. This update incorporates various fixes however has its issues also, similarly as with some other update.

This update makes quality upgrades to the adjusting stack, which is the segment that introduces Windows updates.

System Tray Customization

The System Tray is another name given to the Notification Area, which we can discover in the right-hand of the Windows Taskbar. The System Tray highlights various sorts of notices and alarms from your PC like your Internet association, battery, or the volume level.

Step 1: Select the Windows Key and go to settings, or press the Windows key + I.

Step 2: Under the system -> Select Notification & actions -> Edit your actions

Step 3: Unpin or Pin the notifications.

Windows 10 Shortcut keys

Like most Windows applications, there are a few shortcuts in Windows 10 that everyone should be aware of.

A large portion of the new Windows 10 utilizes the Windows key joined with different keys to play out a few activities. 

How to review dump file and resolve PC issues.... Does the dump file really fix?

In the event that your PC continues to crash, the dump file record may contain hints on the most proficient method to tackle the issue, and in this guide, we'll show you the means to audit & analyze the dump file on Windows 10.

On Windows 10, each time there is a crash issue, the system makes a "dump" document containing the memory data at the hour of the blunder that can help decide the explanation of the issue. 

The ".dmp" document incorporates the stop mistake message, rundown of the drivers stacked at the hour of the issue, and bit, processor, and cycles subtleties, just as different snippets of data relying upon the kind of dump record you are utilizing.

WinDbg (Windows Debugging) is a device that has been intended for troubleshooting kernel and user mode, inspecting processor vaults, registries, and examine crash dumps.

WinDbg tool - after a google search or download from the Microsoft Store and open the tool in admin mode to audit and analyze the error. In the next post, I will be updating this column with different tools.

Sometimes, even the crash dump file does not help where the error was!!!. If you find any other application that can give you feedback( then life will be easy). please do post in the comments.

Opening the CMD through task manager and via shortcut (Standard and admin)

Windows 10, Command Prompt has been accessible for quite a while, and it is a fundamental device that permits anybody to execute orders to change the system settings, run non-graphical devices, (for example, netsh, diskpart, netstat, powercfg, dism, sfc, chcksk, and ipconfig), investigate issues, and mechanize errands on their personal computer or PC.

We already know the different ways to open the command prompt through Windows hotkey + R and from the start-up windows searching for command prompt. In this post, we are going to see how to open the command prompt through the shortcut key and via the task manager.

Opening the Command Prompt through the task manager

Step 1: Select the Windows start button and search for Task Manager or use the shortcut key CTRL+SHIFT+ESC Keys to open the task manager.

Step 2: Select the File Menu and click on the New Task option.

Step 3: Type cmd to open the command prompt. Put a checkmark, if you would like to open the command prompt with administrative privileges and select OK.

Opening the command prompt with a shortcut key

Step 1: Right-Click on the desktop and then select the New->Shortcut.

Step 2: On the Create Shortcut window, enter cmd.exe under Type the location of item and then select Next.

Step 4: Type a name for this shortcut and select Finish.

Step 5: You will see the shortcut cmd file on the desktop. If you like to run this shortcut file in admin mode, then right-click on the shortcut(e.g., cmd) filename->Properties->shortcut->Advanced-> Select Run as administrator.

Sleep States (S0 - S5) in Windows 10

All these days, I know only two sleep states in Windows as Sleep or Hibernate. After some deep search, found different sleep states - tried a quiet few. This will be a long post, though interesting. Check it out.

At the point when Windows enters Sleep mode, it might give the idea that the System essentially goes into a low force state and stays that way. Nonetheless, the interaction is a touch more intricate. The System really goes through a few degrees of Sleep. These levels, or all the more explicitly, power states, are characterized by the Advanced Configuration and Power Interface (ACPI) detail. On the whole, the ACPI specification records six states, which are numbered S0 through S5.

S0 - The PC is in a Working force state and the system is completely operational. All things being equal, certain applications and devices that are not right now being utilized can go into a low force state to save power.

S1 - At the point when a PC enters Sleep mode, S1 is the primary degree of Sleep. At this level, the processor is halted to save power. The memory actually has power and keeps up its substance. At the point when stirred, the framework will ordinarily get back to S0 very quickly - commonly around two seconds.

S2 - After a timeframe in S1, the PC enters S2, the second degree of Sleep. At this level, the processor closes off to save power. The memory actually has power and keeps up its substance. At the point when stirred, the system will commonly get back to S0 in two to five seconds. Remember that the time allotment differs upon your equipment.

S3 - The third degree of Sleep. At this level, notwithstanding the processor, different chips on the motherboard may stop to save power. The memory actually has power and keeps up its substance. At the point when stirred, the system will regularly get back to S0 in five to eight seconds. Once more, the timeframe differs upon your equipment.

S4 -  Glancing through the portrayals of S1 through S3, you can see that with each progressive level, a greater amount of the PC is closed down. In any case, S4 is in hibernation. At this level, a picture of the substance of memory is composed to circle, and the capacity to all applications & the system is stopped. Notwithstanding, a little stream of power remains in the power button. At this point when stirred, the timeframe takes the system to get back to S0 which relies upon numerous variables - yet it will take longer than S1-S3.

S5 - At S5, the system is completely shut down, albeit a little stream of capacity to the force button remains. At the point when the force button is pressed or Squeezed, the PC plays out a cold boot to get back to S0.

This instructional exercise will clarify and tell you the best way to see the rest states accessible on your Windows 10 PC.

Step 1: Open the Command Prompt in Admin mode.

Step 2: Enter the powercfg -a to view the different sleep states

How to view the sleep states in your system?

Note: PC in states S1, S2, or S3 loses all battery power, it should reboot to get back to S0 and anything in memory is lost. Be that as it may, if a PC in state S4 loses all battery power, it will still restart from the previous location, as the contents of memory are retained in the hibernate file.

Tip: To view your system energy problems, try using the command powercfg /energy in the command prompt. After 60 seconds, analyzes the system for common energy efficiency and battery life problems. The output of the report will be stored as an energy-report.html file in the specified drive.

Fix for KB5000802 Windows Update

Microsoft has a known and long history of delivering GOOD and BAD updates. The equivalent is the situation with the KB5000802 update and a bug in the update is causing the BSOD (blue screen of death) issue. 

The issue emerges (subsequent to applying the KB5000802 update) when a client attempts to print a record yet faces a BSOD with the accompanying kind of message:

The BSOD issue isn't restricted to a specific maker of printers, even a few clients detailed that the BSOD happened even while utilizing the in-built printer (like Microsoft Print to PDF).

Fix 1: 

Step 1: Install the Out of Band Update, GoTo Microsoft Update Catalog website, and search for the update as per your Windows OS Version.(e.g., KB5001567, KB5001566 and KB5001565).

Step 2: Download the update, as per your Windows

Step 3: Install the downloaded update as an administrator and follow the prompts to complete the process.

Step 4: Restart the PC and check whether the issue is resolved. 

Fix 2:

Step 1: Re-install the Printer Driver may fix the problem. Disconnect your PC from the printer and afterward download the most recent driver for your printer from the OEM site.

Step 2: Right-click on the Start menu (or Windows) button and in the Quick Access menu, select Device Manager.

Step 3: Expand the Printer(+) option and right-click on your printer.

Step 4: Select the uninstall Device and in the subsequent window, checkmark the choice of Delete the Driver Software of this Device. 

Step 5: Select the uninstall button and wait for the uninstallation of the printer to complete.

Step 6: Reboot the PC.

Step 7: If the issue still persists, then uninstall the printer driver, reboot your PC and install a PCL 6 driver of your printer to check,  if the BSOD issue is resolved.

Fix 3

Step 1: Uninstall the KB5000802 update.

Step 2: Select the Windows key and settings

Step 3: Select the Update and Security, look for View Update History in the right pane.

Step 4: Select Uninstall Updates and select the KB5000802 update

Step 5: Wait for the uninstall to complete and reboot the PC.

If none of the fix works, you know what to do.... trying restoring your system through System Restore to a previous date.

Windows - New icons in File Explorer

Microsoft started refreshing the symbols in Windows 10 a year ago beginning with the implicit applications. From that point forward, changing the symbols all through Windows 10 including the symbol for Windows Security, the Narrator symbol, and most as of late the symbol for Notepad. The subsequent stage is by refreshing a significant number of the framework symbols utilized all through File Explorer. 

Note: After moving up to this update, any custom folders to Quick Access will vanish. You can either make note of them preceding refreshing to this form or respite refreshes until fixed.

Image Source: Microsoft Blog

Post your comments whether you like the New ICoNs.

PowerShell Script for Windows 10 Printing Issues

In the event that the new printing issues brought about by a series of Windows 10 updates weren't so troublesome - and if the low quality of updates from Microsoft hadn't been an issue for such a long time - the circumstance would nearly be amusing. 

All things considered, nonetheless, the individuals who have been influenced by the bug-baffled updates wind up exceptionally disappointed and losing trust in Microsoft's capacity to convey dependable programming. With such countless updates, patches, bug fixes, and workarounds having been delivered over the most recent few weeks, keeping on top of issues has been troublesome. This PowerShell content ought to set everything straight for the last time.

Click here for the Powershell Script

KB5000842 update fix for Windows 10

For Microsoft, March was damaged by a line of hazardous Windows 10 updates that caused a progression of issues with printing and the sky is the limit from there. As we arrive at the month's end, the organization has delivered a discretionary fix which it will in all likelihood be trusting demonstrates less tricky. 

The discretionary KB5000842 update is accessible for Windows 10 adaptation 2004, and Windows 10 20H2. This update intends to address various issues with the working frameworks incorporating issues with dim screens and other screen glitches, and just as framework crashes related to OneDrive.

The full rundown of update features resembles this: 

Updates an issue with zoom that happens when utilizing Microsoft Edge IE Mode on gadgets that utilization different high-DPI screens. 

Updates an issue that makes high unique reach (HDR) screens show up a lot hazier than anticipated. 

Updates an issue that makes video playback be out of sync in copy mode when you utilize various screens. 

Updates an issue that shows nothing or shows "Processing Filters" uncertainly when you channel File Explorer list items. 

Updates an issue that makes the split format inaccessible for the touch console when you turn a gadget to picture mode. 

Advises clients when a youngster account in the Family Safety plan has managerial advantages. 

Updates an issue that keeps you from shutting Toast Notifications utilizing the Close catch on touchscreen gadgets. 

Updates an issue with 7.1 channel sound innovation. 

Updates an issue that makes a gadget quit working on the off chance that you erase records or envelopes that OneDrive synchronizes.

The full rundown of changes for the two forms of Windows 10 that the update applies to can be found on the help page for KB5000842.

Built-in Windows Screen Recorder

You've most likely been utilizing Windows 10 for quite a while now, however that doesn't imply that you've found all that it has to bring to the table. The working framework is loaded with highlights, yet there are some that are covered up away to the degree that they could be viewed as privileged insights. 

One such jewel is the screen recording instrument. What? You didn't realize that Windows 10 could record recordings of on-screen action? You're in good company. The screen recorder is incorporated into the Game bar and you may well not have seen it. On the off chance that you've at any point considered how to make video of what you're doing in Windows, this is exactly the utility you need. Here's the manner by which to access and utilize it - including subtleties of a mysterious console easy route.

The screen recorder isn't an independent utility, so in the event that you take a peruse of the Start menu, you will not discover it. You will be that as it may, have the option to track down the Game bar - however in case you're not a gamer, you may have seen this apparatus and barely cared about it. Investigate the Start menu and quest for "Game bar" or, in case you're an enthusiast of console easy routes, hit the Windows key and G all the while. 

The Game bar will show up, and the "Game catching" inscription that is appeared underneath the time in the window that shows up gives a clue to what in particular is conceivable. 

You'll see a "record" button - the circle symbol - or you can press the Windows key + Alt + R simultaneously to begin recording. Indeed, there's no compelling reason to dispatch the Game bar by any means; you can simply utilize the console alternate way to begin recording screen action.